Adjustable Utensil Rail Holder
The ladle, the tongs, the slotted spoon, the turner and the whisk are what fill a utensil drawer and jam the runner. Hang those five inside a cabinet door you were not using, and the drawer shuts flat again.
- Rail length
- 9″
- Hooks
- 5, each slides the full 9″
- Holds
- 5 utensils, one per hook
- Mounting
- 2 screws or tape, both in the box
- Finish
- Matte black, rail and hooks
- Made
- 100% Made in America
The ladle is why the drawer will not shut
A utensil drawer does not fill evenly. The handful of oversized tools take most of the room, and everything small ends up wedged underneath them.
- They are the wrong shape. A ladle is deep, tongs are long, a slotted spoon is wide. None of them lie flat, so they stack into a pile instead of a layer.
- They jam the drawer. A handle rides up, catches the runner, and the drawer stops halfway. Then you shake it.
- They bury the small stuff. Peelers, spatulas and measuring spoons end up under the pile, which is why you dig.
Set the spacing once, then forget it
The hooks are not fixed in place. Slide each one to suit the tool it carries, then leave it. Mounting needs a screwdriver, or with the tape, nothing at all.
Mount the rail
Two screws for a permanent hold, or the double-sided tape if you would rather not drill a cabinet door. Both are in the box, and the tape needs no tools at all.
Space the hooks
Each hook slides the full 9″. Put the ladle and the turner at the ends where the heads are widest, and the narrow handles together in the middle, so nothing knocks.
Shut the door
All five hang flat against the door, clear of the shelf, out of sight. The drawer they came out of now holds the things you actually dig for.
Two screws, or no holes at all
Two screws hold the rail permanently. If the door is rented, finished, or you just do not want holes in it, the double-sided tape holds the same rail with no tools and no drilling.
- Two screws. The permanent fix. Use these for a heavy cast-iron ladle or a full set of steel tongs.
- Double-sided tape. No drill, no holes, no tools, and it comes off again with a solvent.
- Matte black, rail and hooks. One finish throughout, so against a dark or painted door it reads as part of the cabinet rather than as hardware.
The specifics
- Rail length
- 9″
- Hooks
- 5Each slides the full 9″ and stays put
- Finish
- Matte blackRail and hooks alike
- Mounting
- 2 screws or tapeBoth in the box, no drill needed for tape
- Mounts on
- Any flat 9″ spanCabinet door, pantry door, wall
- Holds
- 5 utensilsLadle, tongs, slotted spoon, turner, whisk
- Care
- Damp clothNo rust, no oiling, no hardware to tighten
- Made
- In AmericaStart to finish
Made in America, in small runs
Every Lyfe Made product is designed and made here by the people who drew it. This one started with a drawer that would not shut because a ladle handle kept catching the runner, and the realisation that the inside of the cabinet door right above it had been empty the entire time.
Questions
Where does the utensil rail mount?
On the inside of a cabinet door, which in most kitchens is empty space already paid for. It also works on a wall, the side of a cabinet run or the back of a pantry door. Anywhere flat with nine inches of clear width.
Will the double-sided tape hold real utensils?
The tape is sized for the rail and the kind of tools it is built for: ladles, tongs, spoons, turners and whisks. If what you hang is the heaviest thing in the kitchen, use the screws instead. Both are in the box, so you can start with tape and change your mind.
Does the cabinet door still close?
That depends on what sits directly behind the door inside the cabinet. The rail and a hanging utensil stand proud of the door, so you need that depth clear. Check where your shelf falls before you mount it.
Can the hooks be moved after it is mounted?
Yes, any time. Each hook slides along the rail. Nothing is glued or fixed, so you can respace them when what you hang changes.
How many utensils does it hold?
Five, one per hook. Pick the five biggest: typically the ladle, the tongs, the slotted spoon, the turner and the whisk. Those are the ones that fill the drawer and catch the runner, so moving exactly those five is what buys the space back.
Will it mark the cabinet door?
Screws leave two holes. The tape leaves a residue that comes off with a solvent. On a finished or rented door, test the tape in a corner first.
What is it made of?
Moulded plastic, matte black on the rail and the hooks alike. It will not rust, will not mark a utensil handle, and does not need oiling or tightening.
How do I clean it?
A damp cloth. There is no hardware to tighten, nothing to rust and nothing to oil. Keep it out of the dishwasher.
Where is it made?
America, start to finish.